![]() ![]() DB-15, designed for connecting to the main ECU connector.J2534 (OBD-II-F), designed for connecting the same name interface to OBD-II.While reading the password, when it is impossible in the vehicle, one must note that high-voltage converters in ECUs consume rather high current at the start which can trigger protection mechanism or even result in the power unit damage It is recommended to use only quality units with 12V output voltage. DC, designed for powering the built-in circuit as well as the connected ECU. ![]() It is to be connected when the built-in USB - UART converter is enabled for PowerBox software update while reprogramming Renesas CPUs USB, designed for connecting to the computer.The tool is fitted with multipurpose connectors which allow to establish the connections flexibly: The tool has built-in current limiting resistors on the following signal lines: It is compatible in the automatic mode with the programming tools which use: The tool is designed for connecting an ECU to a J2534 device and provides manual or automatic power control of the ECU and shaping of the following signals: RESET, BOOT, CNF1, GPT1, GPT2, WATCDOG.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |